Chapter XIV Waveform Generator (Option)
182
Click [Offset] key, and the Offset menu will pop up on the right side of the screen:
Fig. 15.13 DC Offset Menu
Click [Offset] menu key to set the DC offset through the Multipurpose b or numeric keypad, with the value range
of -1.25 V ~ 1.25 V.
15.1.6 Noise
Press down
【
WaveGen
】
key on the front panel, open the WaveGen menu, click [Waveforms] key, and open the
Waveforms menu on the right side of the screen. Click [Noise] key, set the waveform to Noise, and adjust the
WaveGen to corresponding menu of Noise after selection:
Fig. 15.14 WaveGen Menu (Noise)
Amplitude/High
Click [Amplitude] or [High] key, and the Amplitude/High menu will pop up on the right side of the screen. The
Amplitude or High can be set, with the amplitude adjustment range of 10 mV ~ 2.5 V and the high level
adjustment range of -1.245 V ~ 2.5 V.
Offset/Low
Click [Offset] or [Low] key, and the Offset/Low menu will pop up on the right side of the screen. The Offset or
Low can be set, with the offset adjustment range of -1.25 V~1.25 V and the low level adjustment range of -2.5 V ~
1.245 V.
15.1.7 Arbitrary
Press down
【
WaveGen
】
key on the front panel, open the WaveGen menu, click [Waveforms] key, and open the
Waveforms menu on the right side of the screen. Click [Arbitrary] key, set the waveform to Arbitrary, and adjust
the WaveGen to corresponding menu of Arbitrary after selection:
Fig. 15.15 WaveGen Menu (Arbitrary)
Frequency/Period
Click [Frequency] or [Period] key, and the Frequency/Period menu will pop up on the right side of the screen. The
Frequency or Period can be set, with the frequency adjustment range of 100 mHz
10 MHz and the period
adjustment range of 100 ns ~ 10 s.
Amplitude/High
Click [Amplitude] or [High] key, and the Amplitude/High menu will pop up on the right side of the screen. The
Amplitude or High can be set, with the amplitude adjustment range of 10 mV ~ 2.5 V and the high level
adjustment range of -1.245 V ~ 2.5 V.
Offset/Low
Click [Offset] or [Low] key, and the Offset/Low menu will pop up on the right side of the screen. The Offset or
Low can be set, with the offset adjustment range of -1.25 V~1.25 V and the low level adjustment range of -2.5 V ~
1.245 V.
Shape
Click [Shape] key, and the Shape menu will pop up on the right side of the screen:
Summary of Contents for 4456 Series
