OPERATOR SAFETY
17
●Always follow proper procedures for going downhill and for braking on hills:
▪
Check the terrain carefully before you start down a hill.
▪
Shift your weight backward.
▪
Never go down a hill at high speed.
▪
Avoid going down a hill at an angle,which would cause the vehicle to lean sharply to one side.
▪
Travel straight down the hill when possible.
●Always follow proper procedures for crossing the side of a hill:
▪
Avoid hills with excessively slippery or loose surfaces.
▪
Shift your weight to the uphill side of the Vehicle.
▪
Never attempt to turn the vehicle around on any hill until you’ve mastered (on level ground) the
turning technique outlined in this manual.
▪
Avoid crossing the side of a steep hill when possible.
●Always use proper procedures if you stall or roll backwards while climbing a hill:
▪
To avoid stalling, maintain a steady speed when climbing a hill.
▪
If you stall or roll backwards, follow the special procedure for braking described in this manual.
▪
Always dismount on the uphill side, or to either side if the vehicle is pointed straight uphill.
▪
Turn the Vehicle around and remount following the procedure described in this manual.
●Always check for obstacles before operating in a new area. Never attempt to operate over large
obstacles,such as rocks or fallen trees. Always follow proper procedures when operating over obstacles
as described in this manual.
