Ver. 100331
TERA BOX SATA RAID IV User’s Manual
58
4.6 MODE SETTING
with the device’s LEDs to indicate status. To select a storage policy in this mode
the first time that a new factory-shipped product is used, ensure that the hard disk drives are installed; turn off the
power before set the MODE SWITCH on the back of the
TEAR BOX SATA RAID IV
to the desired Storage Policy.
To change the storage policy thereafter, set the MODE SWITCH to the desired position and press and hold the
recessed SETUP BUTTON, than power on to create the new virtual volume(s). Creating new virtual volumes will
a that existed on the previous volume.
MODE
MODE storage policy requires a minimum of 1 drive to implement.
The
TEAR BOX SATA RAID IV
destroy any existing dat
Note: Before reconfiguring a volume, back up your data and delete previously defined partitions.
4.6.1
CLEAN
The CLEAN
1. Turn off the power.
2. Set the MODE SWITCH position to CLEAN.
3. Press and hold the recessed SETUP BUTTON.
