2
Palmgren Operating Manual & Parts List 9682090
DESCRIPTION
Palmgren Bench Grinders are equipped with a totally enclosed ball
bearing motor. Armature assembly is dynamically balanced for
smooth operation. Motor housing is compact so long pieces of
work can press against both wheels without touching the motor
frame. Removable wheel guards allow for easy changing of wheels.
Two-way tool rests are adjustable for wheel wear and angle
grinding. Grinders come complete with spark guards and safety
eyeshields.
UNPACKING
Check for shipping damage. If damage has occurred, a claim must
be filed with the carrier immediately. Check for completeness.
Immediately report missing parts to dealer.
To be certain the grinding wheels have not been damaged in ship-
ment, strike the edges slightly with a metal object. A ringing sound
indicates a good wheel, but a dull noise may signal a fracture.
WARNING:
If you suspect a wheel of being fractured, replace it
immediately. Fractured wheels may shatter, causing serious injury.
SPECIFICATIONS
9682090, 6” Bench Grinder
Horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Amperes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5
Hertz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single
RPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1750
Rotation (viewed from left side) . . . . . . . . . . . . . . . . . . . . . . . . Clockwise
Wheel Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6”
Wheel Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2”
SAFETY RULES
WARNING:
This product can expose you to chemicals including
lead and cadmium which are known to the State of California to
cause cancer and birth defects or other reproductive harm, and
phthalates which are known to the State of California to cause birth
defects or other reproductive harm. For more information go to
http://www.p65warnings.ca.gov.
WARNING:
Some dust, fumes and gases created by power sanding,
sawing, grinding, drilling, welding and other construction activities
contain chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm. Some examples of
these chemicals are:
•
Lead from lead based paint
•
Crystalline silica from bricks, cement and other masonry
products
•
Arsenic and chromium from chemically treated lumber
Your risk of exposure varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals, work in a
well-ventilated area and work with approved safety equipment,
such as dust masks that are specifically designed to filter out micro-
scopic particles. For more information go to http://www.p65warn-
ings.ca.gov/ and http://www.p65warnings.ca.gov/wood.
BE PREPARED FOR JOB
•
Wear proper apparel. Do not wear loose clothing, gloves, neck-
ties, rings, bracelets or other jewelry which may get caught in
moving parts of machine.
•
Wear protective hair covering to contain long hair.
•
Wear safety shoes with non-slip soles.
•
Wear safety glasses complying with United States ANSI Z87.1.
Everyday glasses have only impact resistant lenses. They are
NOT safety glasses.
•
Wear face mask or dust mask if operation is dusty.
•
Be alert and think clearly. Never operate power tools when tired,
intoxicated or when taking medications that cause drowsiness.
PREPARE WORK AREA FOR JOB
•
Keep work area clean. Cluttered work areas and work benches
invite accidents.
•
Do not use power tools in dangerous environments. Do not use
power tools in damp or wet locations. Do not expose power
tools to rain.
•
Work area should be properly lighted.
•
Proper electrical plug should be plugged directly into properly
grounded, three-prong receptacle.
•
Extension cords should have a grounding prong and the three
wires of the extension cord should be of the correct gauge.
•
Keep visitors at a safe distance from work area.
•
Keep children out of the workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to prevent
any unintentional use of power tools.
TOOL SHOULD BE MAINTAINED
•
Always unplug tool prior to inspection.
•
Consult manual for specific maintaining and adjusting
procedures.
•
Keep tool clean for safest operation.
•
Remove adjusting tools. Form habit of checking to see that a -
djusting tools are removed before turning machine on.
•
Keep all parts in working order. Check to determine that the
guard or other parts will operate properly and perform their
intended function.
•
Check for damaged parts. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting and any
other condition that may affect a tool’s operation.
•
A guard or other part that is damaged should be properly re-
paired or replaced. Do not perform makeshift repairs. (Use the
parts list to order replacement parts.)
KNOW HOW TO USE TOOL
•
Use right tool for job. Do not force tool or attachment to do a
job for which it was not designed.
•
Disconnect tool from power when changing accessories such as
grinding wheels, buffing wheels and the like.
•
Avoid accidental start-up. Make sure that the switch is in the off
position before plugging in.
•
Do not force tool. It will work most efficiently at the rate for
which it was designed.
•
Keep hands away from moving parts and grinding surfaces.
•
Never leave a tool running unattended. Turn the power off and
do not leave tool until it comes to a complete stop.
•
Do not overreach. Keep proper footing and balance.
•
Never stand on tool. Serious injury could occur if tool is tipped
over.
•
Know your tool. Learn the tool’s operation, application and
specific limitations.
•
Use recommended accessories. Understand and obey all safety
instructions supplied with accessories. The use of improper
accessories may cause risk of injury to persons.
•
Do not over tighten wheel nut. Replace cracked wheel immedi-
ately. Use only flanges supplied with the grinder.
9682090_oipm_En013_9643557.01 __ 02-08-2019 . . . . 02/08/19 3:05 PM Page 2