Install of The Compact Panel Cassette Type Indoor Unit
9
Air leak
Air leak from ceiling
Water condensatation, water drop
Fig.14
② .
If gap still exist between ceiling and decoration panel after tightening the screws, readjust
the height of the indoor unit. (As shown in fig.15)
If the raising lever and drain hose are
not affect, can adjust the height of
indoor unit by the hole on the corner
of panel.
Gaps are not allowed
Fig.15
※
After fixing, be sure no gap left
between the ceiling and the panel.
③ .
Wiring of the decoration panel (Fig.16)
Connect the joints for swing flap motor lead wire (at 2 places) installed on the panel.
At body
At pane
At body
At pane
Fig.16