6
4
4
4
4
4
4
4
7
7
7
7
7
7
4
4
4
4
4
• DO NOT place any objects on the trampoline while anyone is
jumping on it. Please be aware of your surroundings to
ensure there are no objects that could cause harm when you
are playing on the trampoline.
• The frame of your trampoline is made of steel and it will
conduct electricity. No electrical equipment
(lights, heaters, extension cords, household appliances, etc.)
should be permitted in or on the enclosure
under any circumstances to avoid the risk of electrocution.
ENCLOSURE NETTING AND MAT – SAFE USE
CONDITIONS
• Children MUST NEVER be left unattended inside the
enclosure at any time.
• The enclosure is ONLY intended to be used to reduce the risk
of injury from falling off the trampoline.Do not intentionally
kick, bounce against, climb on, hang from, jump over or crawl
under the netting.
• Enter and exit the enclosure only through the enclosure door.
Do not go through the gap between the netting and the mat.
Trying to exit this way poses a risk of strangulation, especially
for young children.
• The enclosure netting and mat must be inspected prior to
each use. If there are any signs of weakness, you must stop
using the trampoline immediately, properly store the
trampoline and restrict access by users until a new
Sportspower authorized replacement netting or pad is
installed.
• It is recommended that you replace the trampoline enclosure
net and pad every 12 months.
• Make sure that the velcro fasteners are closed correctly
during use of trampoline.
Step 6
Step 7
8
Assembly Instructions
COVER THE TRAMPOLINE
FRAME WITH THE FRAME PAD
AND TIE THE ELASTIC STRAPS
AROUND THE FRAME. MAKE
SURE ALL METAL PARTS ARE
COVERED.
CONNECT SIX ENCLOSURE
POLES (7) TO THE TRAMPOLINE
FRAME AS SHOWN.
FRAME PAD
(IN LIFT-UP POSITION)
ELASTIC STRAP
7
4
