User Instructions
Important – Please read these instructions fully before assembly or use
Age: 9
WARNINGS
ASSEMBLY
TECHNICAL FEATURES
INTRODUCTION TO THE TOY
HOW TO USE THE TOY
Please read these instructions carefully before using the toy
and keep for future reference.
This toy car runs on 2 alkaline 1.5 Volt “AA” batteries. Batteries
are not included.
For your child’s safety: ATTENTION!
Before using the product remove and dispose of any plas-
tic bags and any other packaging (e.g. fasteners and fixing
ties etc) and keep them out of reach of children. Suffoca-
tion hazard.
• Check the product regularly for signs of wear and dam-
age and to ensure that it is assembled correctly. Should
any part be visibly damaged, do not use the toy and
keep it out of children’s reach.
Using this toy in very low temperatures can cause the plas-
tic material to lose its elasticity and become fragile; should
this happen, do not allow the child to use it and store it
After removing all the elements from the box, follow these
simple instructions to assemble the product.
1. Insert the tree trunk (1) into the base of the toy, as seen
in diagram A.
2. Now insert the top of the tree (2) onto the trunk, as
Diag. C-3 ON/OFF lever switch (I / O).
Diag. C-4 battery compartment cover.
Diag. C-5 3 other chutes for the balls to roll down.
Diag. C-6 hippopotamus: when pressed it plays music and
An activity centre where they can play with three enter-
taining spinning balls, decorated with animals that chil-
dren can place on the three different chutes and let them
slide into the rotating pond. It has a number of different
Switch the toy ON by pushing the ON /OFF lever switch
(Diag. C-3) to I. In order to avoid using up the batteries for
away in a warm suitable environment.
• This product must only be assembled by adults only.
• Do not use the toy until it has been fully assembled and
checked.
• Do not use this toy in any mode other than those illus-
trated in the manual.
• This toy should only be used under the supervision of an
adult.
• Do not leave the toy near heat sources or in direct sun-
light for long periods of time as this could cause the
plastic elements to deteriorate.
seen in diagram B, making sure the colours on the holes
match the colours on the slides below.
This toy can not be disassembled once you have complet-
ed to assembly procedure.
sound effects and the pond rotates making the
balls spin round.
Diag. C-7 spinning ball.
activities: a roller, a rocking toucan and a hippopotamus
that, when pressed, spins the balls around and activates
some great entertaining music.
no reason, it is recommended to turn off the toy by moving
the ON/OFF switch to O (diag. C-3) when not in use.
