44
Chapter 9 AC Adapter & Battery Safety
9.1 Switching AC/DC Power Adapter Specification
Manufactory:
GME TECHNOLOGY CO., LTD.
Input: AC 100~240V, 50~60Hz, 0.28A
Output: DC 5V, 2A
Label: refer to the Figur9-1.
Figur9-1 AC Adapter Label
9.2 Battery Safety Guidelines
•
The area in which the units are charged should be clear of debris and combustible materials or
chemicals. Particular care should be taken where the device is charged in a non-commercial
environment.
•
Follow battery usage, storage, and charging guidelines found in the user’s guide.
•
Improper battery use may result in a fire, explosion, or other hazard.
•
To charge the mobile device battery, the battery and charger temperatures must be b32
F and +113 F (0 and +45 C).
•
Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may
present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the
compatibility of a battery or a charger, contact Chainway technical support.
•
For devices that utilize a USB port as a charging source, the device shall only be connected to
products that bear the USB-IF logo or have completed the USB-IF compliance program.
•
To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, all
batteries will carry a Chainway hologram. Do not fit any battery without checking it has the
