09
.Make sure power switch is on, the line icon (-) should be pushed in – Test Chair
continue to next step if needed.
.Check each end of the power cord (where the power cord plugs into the chair
and where it plugs into the wall outlet) and make sure each end is securely
plugged in.
.Check if the power failure.
.Please use the massage chair periodically.
.ONLY use dry cloth to clean the remote control.
.DO NOT expose the chair directly to sunlight, or close to the fire and heater.
Step 1
Plug into the power cord, and then turn on the power switch on the right side.
Step 2
Please operate the TS-8805 Massage Chair by the following steps.
(1)Automatic Massage Functions
When you press any auto programs, it will automatically adjust the angle of
the chair. Also, you can adjust the angle of the char to the most comfortable
position by pressing AUTO RECLINER, FOOTREST, RECLINE and ZERO-G buttons
from the manual setting.
A.If you press ENERGY, RELAX, DEEP-TISSUE, STRETCH, QUICK, please refer to
the following steps.
Step 1. The massage function will be started after the chair angle is reclined in
position. The back and foot massage are set on the deep massage therapy
program.
Step 2. You have finished the setting. Please let your body relaxed, and enjoy
the whole course of the program.
B.Please press “SHOULDER”, “BACK” or “WAIST” button to select massage area
and have an automatic massage. The AUTO AIR button, auto recliner can be
operated individually or collocating with the massage function.
(2)Manual Massage Functions
Step 1. Press “TIME” button to select massage time.
Step 2. Press “Function” button to select massage functions of KNEAD, KNEAD
& TAP, SHIATSU, FLAP, TAP.
Step 3. Set the body WIDTH, SPEED, REGION, HEAT, REGION ROLL UP/DOWN as
per your favor.
Step 4. The AUTO AIR, HEAT, SOLE ROLLER can be operated individually or
collocating with the massage functions.
(3)Power
Press the POWER button to stop all of the programs while functioning. The
massage rollers will automatically return to the top of the mechanism, and
the chair will reset into full upright position.
(4)When finished, please switch off the power and remove the power cord.
10
Basic Troubleshooting Guide – No Power
Daily Maintenance
Steps of Operation
