Basic Replacement Guide
Please Note – Always unplug the power cord of the chair from the wall outlet
when replacing and/or maintaining any part/s of the chair.
How to replace the fuse (near the power switch)
1. Turn off the power switch, and unplug the power cord from the chair.(reference
picture 1)
2. Use a small flap tip screw driver to pry out the fuse cartridge. Cartridge slides out
directly towards you. (Reference pictures 2 and 3)
3. Replace the fuse in the clamp (fuse
d currently being used) with the fuse in the
square enclosure (spare fuse). Spare fuses (5
AMP) can be purchased at any local
electronics store. (Reference picture 4)
4. Slide back in the fuse cartridge.
5. Plug back in the power cord to the chair. Turn on the switch power, the line icon (-)
should be pushed in.
6. Test chair and see if it powers up. You should hear a “BEEP” sound when there
has power to the chair.
Picture 1 :
Remove power cord.
Picture 2 :
Fuse cartridge / housing.
Picture 3 :
Use flat tip screw driver to pry out.
Picture 4 :
Fuse cartridge / housing slides out
toward you.
- 13 -
Summary of Contents for TS-8800
