FIGURE 2
FIGURE 3
Setting the OSD language
The system can support 6 language of OSD text such as English, Italian, Cesky, Espaniol, Potrugues and
Romanian. Select your favorite OSD language as below :
1.
Press Power On/Standby (10) button.
2.
Press and hold the Function button (on the Remote control only) few second, the TFT display (2) will
show the language list.
3.
Press Skip Up
/ Down
(11,14) button to select your descried language.
4.
Press Play/Pause
(9) button to confirm the selecting.
5.
Press Stop (12) to quit out this mode.
Playback Video/Audio of MP3/MP4 file via USB/SD card storage media
The system is able to decode and playback all MP3/MP4 which stored in the memory media with USB
connecting port or SD/MMC memory card.
1.
Set the system at standby mode first by Power On/Standby (10).
2.
Plug-in the USB pen-drive with the face up & make sure it going into completely or insert the memory
card in the direction of the arrow as shown in the label on top of the memory card slot. Insert straight
without bending.
Connecting the USB upside down or backwards could damage the audio system or the
storage media (USB thumb drive / SD/MMC card). Check to be sure the direction is correct
before connection.
3.
Press Power On/Standby (10) button to turn on the unit.
4.
Press functions button (17) to select “ CARD “ or “ USB “ mode.
5.
The system will start reading the storage media automatically after connecting, and TFT display (2) will
