Power Connection
1.
Connect the DC plug (24) of the AC/DC adaptor to the DC jack (21) of the unit.
2.
Connect the AC/DC adaptor (23) to the AC outlet. The standby button should light up.
Audio/Video in/out and HDMI Connection
1.
Connect the RCA A/V cable (25)(included) from AV output (22) to your home TV which had AV input or
connect the HDMI cable (not included) from the HDMI out (20) of the main unit to your TV which had
HDMI input same as below figure 1.
2.
Or connect the RCA A/V cable to your TV audio in and audio out connect to your home music center Aux
In same as figure 3.
3.
Connect the RCA A/V cable (25) from the RCA input (19) to encode source device such VCR/TV for
encoding same as figure 1or connect the 3.5mm cable (not included) from the AV input (5) to encode
source device such VCR/TV for encoding same as figure 2.
FIGURE 1
