APR 2018
CMT-330TC Three-Knife Trimmer
4-10
4. Routine Tasks
4.7 Safety Systems Check
Test Frequency:
Daily
CAUTION
Only one person should perform this test at a
time.
Use the following procedures to test the safety
devices throughout the machine. If the machine
fails any safety system test, DO NOT USE the
machine. Have the machine serviced by an au-
thorized service technician.
Console Stop Button:
1. Switch on the main power.
2. Press the green start button on the front
console and wait for the trimmer to initialize.
3. Press the red stop button at the console. All
motors should stop running.
4. Twist the red stop button to release it.
Rear Stop Button:
1. Switch on the main power.
2. Press the green start button on the front
console and wait for the trimmer to initialize.
3. Press the red stop button at the rear of the
trimmer. All motors should stop running.
4. Twist the red stop button to release it.
Front Sliding Door Interlock:
1. Switch on the main power.
2. Press the green start button on the front
console and wait for the trimmer to initialize.
3. Open the front sliding door. All motors
should stop running.
4. Close the door.
Right Rear Sliding Door Interlock:
1. Switch on the main power.
2. Press the green start button on the front
console and wait for the trimmer to initialize.
3. Open the right rear sliding door. All motors
should stop running.
4. Close the door.
Left Rear Sliding Door Interlock:
1. Switch on the main power.
2. Press the green start button on the front
console and wait for the trimmer to initialize.
3. Open the left rear sliding door. All motors
should stop running.
4. Close the door.
Back Double Door Interlock:
1. Switch on the main power.
2. Press the green start button on the front
console and wait for the trimmer to initialize.
3. Open one of the two upper back doors. All
motors should stop running.
4. Close the door.
5. Press the green start button on the front
console and wait for the trimmer to initialize.
6. Open the other of the two upper back doors.
All motors should stop running.
7. Close the door.
Right Rear Lower Door Interlock:
1. Switch on the main power.
2. Press the green start button on the front
console and wait for the trimmer to initialize.
3. Open the right rear lower door. All motors
should stop running.
4. Close the door.
Left Rear Lower Door Interlock:
1. Switch on the main power.
2. Press the green start button on the front
console and wait for the trimmer to initialize.
3. Open the left rear lower door. All motors
should stop running.
4. Close the door.
Lower Back Door Interlock:
1. Switch on the main power.
2. Press the green start button on the front
console and wait for the trimmer to initialize.
3. Open the lower back door. All motors
should stop running.
4. Close the door.
Use the Safety Check-Off Sheet on the following
page to record the initials of the person perform-
ing the tests and the date the tests are per-
formed. Make photocopies of the check-off
sheet as necessary.
Summary of Contents for CMT-330TC
Page 4: ...APR 2018 CMT 330TC Three Knife Trimmer iv Introduction Notes...
Page 28: ...APR 2018 CMT 330TC Three Knife Trimmer 1 24 1 Introduction NOTES...
Page 60: ...APR 2018 CMT 330TC Three Knife Trimmer 3 12 3 Operator s Guide NOTES...
Page 72: ...APR 2018 CMT 330TC Three Knife Trimmer 4 12 4 Routine Tasks NOTES...
