Challenge iJOG, Instructions And Parts Manual

The  Challenge Machinery 

Company provides owner's 

manuals on its products solely as a courtesy to its customers. 
See the information below before using this manual.

These manuals are for reference only. These manuals include products which are non-
current, unsupported or no longer produced by The Challenge Machinery Company, and are 
provided solely as an accomodation to our customers.  By providing these manuals, The 
Challenge Machinery Company makes no representation or warranty as to the products, 
their current condition, or their suitability or fitness for use in any particular application, which 
are the sole and independent responsibility of the product owner and user. 

Older products may not comply with current safety procedures, guidelines or regulations, 
and it is the product owner's and user's responsibility to evaluate the suitability and fitness of 
the products in their current use and application.  The Challenge Machinery Company makes 
no representation, warranty or recommendation regarding any modifications which may be 
required on non-current or unsupported products. The Challenge Machinery Company 
assumes no liability for any modification or alteration to any Challenge product, and any such 
modification or alteration to any Challenge product is not authorized by The Challenge 
Machinery Company. The availability of these manuals is solely for the purpose of providing 
reference information for the products.   

This 

manual may not  be 

complete 

in 

all aspects of product 

maintenance  and  repair.    All 

products should be used only by qualified and properly trained personnel, following proper 
safety procedures. All products should be regularly inspected and maintained, and their condition, 
application and use should be periodically evaluated by qualified personnel. Only qualified and 
properly trained technicians should perform maintenance, repair  and replacement 
procedures. Attempting  these procedures  without  proper  training  may  cause  machine 
damage or  operator injury!

Products  may be unsupported by The Challenge Machinery Company  due to age or the 

unavailability  of  parts  from  their  original manufacturer. No parts  or product support will be 
available to repair or maintain unsupported  products. Older  products may not be UL listed (if 
the product does not have a UL label it is not a listed product), and may not comply with 
applicable installation or other regulations or requirements if relocated  to a new facility. 
Many  municipalities require 

a 

product to be UL listed before 

an electrician 

will 

connect power  

to  them. Often the cost of updating an older product to comply with current safety regulations is 
greater than the value of the product. 

www.WhitakerBrothers.com