79033093 D Rev.
01-9
Introduction
Engine Starting
FIG. 10:
Only start engine from operator’s seat. Never
short across starter terminals or batteries.
Move all hydraulic controls to HOLD position and
transmission control lever to PARK before starting engine.
m
WARNING: Machine will turn if steering
wheel is moved and engine is starting or
running.
Do not start engine until area is free of personnel. This
aids in avoiding personal injury due to unexpected
machine movement.
Seat Belts
FIG. 11:
Only operate machine from operator’s seat with
seat belt fastened. Only operate controls while engine is
running.
Any rider in instructor’s seat must fasten seat belt. Never
allow anyone on any part of machine or its attachments
except in operator’s and instructor’s seat when engine is
running.
Shield Removal
FIG. 12:
Some photos in this manual may have been
taken with shields removed for clarity.
m
WARNING: To provide a better view, certain
photographs and illustrations in manual
may show an assembly with shields
removed. Do not operate machine unless all
shields are in good condition and are in
place. Replace shields immediately upon
completion of inspection, repairs, cleaning
or adjustments and before operating begins
or resumes.
FIG. 10
N020903010
FIG. 11
N020903011
FIG. 12
N020903012
Find manuals at http://best-manuals.com/search?&s=CHAL-79033093
