Introduction
01-22
79033093 D Rev.
LUBRICANT VISCOSITIES AND REFILL
CAPACITIES
Lubricant Viscosities
Proper oil viscosity grade is determined by minimum
outside temperature while machine is started and while
operated. To determine proper oil viscosity grade, refer to
minimum column in following table. This information
reflects coldest ambient temperature condition for starting
and for operating a cold machine. Refer to maximum
column in table to select oil viscosity grade for operating
machine at highest temperature anticipated. Use highest
oil viscosity allowed for ambient temperature when
starting machine.
Machines operated continuously should use oils having
higher oil viscosity in final drives and in differentials. Oils
with higher oil viscosity will maintain highest possible oil
film thickness. Consult dealer if additional information is
needed.
Refill Capacities
Lubricant Viscosities for Ambient Temperatures
Compartment or
System
Oil Type and
Classification
Oil
Viscosities
Celsius
Fahrenheit
Min.
Max
Min.
Max
Engine Crankcase
CI-4
CH-4
SAE 0W20
-40
10
-40
50
SAE 0W30
-40
30
-40
86
SAE 5W30
-30
30
-22
86
SAE 5W40
-30
40
-22
104
SAE 10W30
-20
40
-4
104
SAE 15W40
-15
50
5
122
Front Idler Hub
Midwheel Hub
Drive Wheel Hub
TO-4
SAE 50
synthetic
-30
50
-22
122
Hydraulic System
Transmission
Final Drive
AGCO®
Permatran®
821XL
SAE 10W30
-25
40
-13
104
Approximate Refill Capacities
Compartment or System
Liter (Gal)
Cooling System
43.3 L (11.4 gal)
Fuel Tank (Standard Gauge)
413 L (109 gal)
Fuel Tank (Wide Gauge)
(1)
640 L (169 gal)
Engine Crankcase and Filter
30 L (7.9 gal)
Hydraulic
System
Standard Gauge
219 L (58 gal)
Wide Gauge
227 L (60 gal)
Ultra Wide Gauge
257 L (68 gal)
Front Idler Hub
0.45 L (0.12 gal)
Midwheel Hub
0.189 L (0.05 gal)
Drive Wheel Hub
1.590 L (0.42 gal)
Windshield Washer Reservoir
3.78 L (1gal)
(1) Value for two modular tanks. Available third tank will add 30 gallons.
Find manuals at http://best-manuals.com/search?&s=CHAL-79033093
