Introduction
01-2
79033093 D Rev.
IMPORTANT SAFETY INFORMATION
FIG. 1:
Most personal injuries occurring during product
operation, maintenance or repair are caused by failure to
observe basic safety rules and precautions. In most
cases, an injury can be avoided by recognizing hazardous
situations before an injury occurs.
Be alert to potential hazards and have the necessary
training, skills and tools to perform these functions
properly.
Improper operation, lubrication, maintenance or repair of
product can be hazardous and could result in injury or
death.
Do not operate or perform any lubrication, maintenance
or repair on product, until reading and understanding
operation, lubrication, maintenance and repair
information.
Safety precautions and warnings are provided in manual
and on product. If hazard warnings are not heeded, bodily
injury or death could occur to operator or bystanders.
Not every possible circumstance involving a potential
hazard can be anticipated. Warnings in service manual
and on product are, therefore, not all inclusive. If a tool,
procedure, work method or operating technique not
specifically recommended by AGCO is used, ensure it is
safe for operators and others.
Make sure product will not be damaged or be made
unsafe by operation, lubrication, maintenance or repair
procedures chosen. Information, specifications and
illustrations in publication are based on information
available at time of publication.
Specifications, torques, pressures, measurements,
adjustments, illustrations and other items can change at
any time. Changes can affect service given to product.
Obtain complete and most current information before
beginning any job. Dealers have the most current
information available.
m
WARNING: When replacement parts are
required for this product, AGCO
recommends using AGCO replacement
parts or parts with equivalent specifications
including, but not limited to, physical
dimensions, type, strength and material.
Failure to heed this warning can lead to
premature failures, product damage,
personal injury or death.
FIG. 1
N020903002
Find manuals at http://best-manuals.com/search?&s=CHAL-79033093
