background image

Models 956C, 956C-CF, 956C-CN, 956C-RD, 956C-SP

3-Button Security

®

Mini Remote Control

OWNER'S MANUAL

The 900 Series remote control (Security

®

) works only with

door openers and light controls having an orange “learn”
button and a yellow indicator light.

Programming instructions are described and illustrated
below. The additional push buttons can also activate other
garage door openers and/or light controls. (Instructions for
programming light products are included with those 
accessories.)

KG

1

3

9

7

5

KG

1

3

9

7

5

1. Press and release the “learn” button on the

motor unit. The learn indicator light will
glow steadily for 30 seconds.

2. Within 30 seconds, press and hold the 

button on the hand-held remote. 

3. Release the button when the motor unit

light blinks. It has learned the code. If
light bulbs are not installed, two clicks will
be heard.

To Erase All Codes From Motor Unit Memory

To deactivate any unwanted remote, first erase all codes:

Press and hold the “learn” button on motor
unit until the learn indicator light goes out
(approximately 6 seconds). All previous codes
are now erased. Reprogram each remote or
keyless entry you wish to use.

To Control the Opener Lights

In addition to operating the door, you may program the remote
to operate the lights.

1.

With the door closed, 

press and hold the remote button that

you want to control the light.

2. Press and hold the Light button on the door control.

3. Press and hold the Lock button on the door control.

4. After the opener lights flash, release all buttons.

Test by pressing the remote push button. The opener lights
should turn on or off but the door should not move.

Instructions are described and illustrated below

LiftM

ast

er

To prevent possible SERIOUS INJURY or DEATH from a moving
gate or garage door:
• ALWAYS keep remote controls out of reach of children.  NEVER

permit children to operate, or play with remote control
transmitters.

• Activate gate or door ONLY when it can be seen clearly, is properly

adjusted, and there are no obstructions to door travel.

• ALWAYS keep gate or garage door in sight until completely closed.

NEVER permit anyone to cross path of moving gate or door.

WARNING

CAUTION

WARNING

WARNING

The Remote Control Batteries

The lithium batteries should produce
power for up to 5 years. To replace, pry
open case as shown. Insert batteries

positive side up (+).

Dispose of old batteries properly.

To prevent possible SERIOUS INJURY or DEATH:

• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.

WARNING

CAUTION

WARNING

WARNING

NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of
this receiver and/or transmitter are prohibited, except for changing the code setting or replacing
the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

©2006, The Chamberlain Group, Inc.

114A2216D

All Rights Reserved

Replacement Parts

3V2032 Lithium Battery  . . . . . . . . . . . . . . . . . . . . . . .10A20

FOR SERVICE DIAL OUR TOLL FREE NUMBER: 
1-800-654-4736

/

Reviews: