30
30
MAINTENANCE:
1.
Disconnect power before servicing.
2.
The gate area should be kept clean to insure proper operation.
3
. Check for belt tightness.
4
. Check chain for tightness. Refer to chain distance and height page.
5.
Make sure the reversing sensor is functioning properly. Check it monthly. (Page 29)
6.
Make sure the gate track is clear of dirt, rocks or other substances.
7.
Make sure the wheels are operating smoothly on the track.
8.
Oil the chain regularly with a chain lubrication oil available at most motorcycle stores.
9.
Check for proper synthetic oil level in the gear box. (10W-30 weight synthetic oil)
10.
Severe or high cycle usage will require more frequent maintenance checks.
11.
Inspection and service should always be performed anytime a malfunction is observed or suspected.
12.
When servicing, please do some “house cleaning” of the operator and the area around the operator. Pick up any debris in the
area. Clean the operator as needed.
13.
It is suggested that while at the site voltage readings be taken at the operator. Using a Digital Voltmeter, verify that the incoming
voltage to the operator it is within ten percent of the operators rating.
14.
Verify all safety and entrapment devices are functioning.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of SEVERE INJURY or DEATH:
1.
READ AND FOLLOW ALL INSTRUCTIONS.
2.
NEVER let children operate or play with gate controls.
Keep the remote control away from children.
3.
ALWAYS keep people and objects away from the gate.
NO ONE SHOULD CROSS THE PATH OF THE MOVING
GATE.
4.
Test the gate operator monthly. The gate MUST reverse
on contact with a rigid object or stop when an object
activates the non-contact sensors. After adjusting the
force or the limit of travel, retest the gate operator.
Failure to adjust and retest the gate operator properly
can increase the risk of INJURY or DEATH.
5.
Use the emergency release ONLY when the gate is not
moving.
6.
KEEP GATES PROPERLY MAINTAINED. Read the
owner’s manual. Have a qualified service person make
repairs to gate hardware.
7.
The entrance is for vehicles ONLY. Pedestrians MUST
use separate entrance.
8.
Disconnect ALL power BEFORE performing ANY
maintenance.
9.
ALL maintenance MUST be performed by a
Chamberlain Elite professional.
10.
SAVE THESE INSTRUCTIONS.
WARNING
Maintenance and Operation
