12
M O U N T I N G O P E R A T O R ( C O N T I N U E D )
Position the Miracle-One™ horizontally level on the closed gate,
where desired. For strength purposes, the front steel bracket must be
attached in an area that can withstand heavy forces. Additional
reinforcement steel plates may be necessary for mounting.
With the operator removed
,
completely
weld around the brackets and plates on the gate.
The gate must be in the closed position. Make sure the operator is
kept level while
tack welding
the front and back brackets and
reinforcement steel plates in position. After all tack welding is finished,
remove the operator to avoid damaging it!
Bolt
Nut
Bushing
Washer on top of bracket.
Traveler Carriage
2.25" vertical height between front and back brackets.
Nut
Back Bracket
Front Bracket
NOTE:
Front and back
bracket hardware must be
installed as shown. Nuts
must be tight or operator
will not work correctly.
