3
S P E C I F I C A T I O N S
Mechanical Specifications
Motor –
24 Vdc, 12 Amps.
Cycles –
100 / Day. (Consult factory for solar applications)
Shipping Weight:
Single Unit: 58 lbs. – Master/Second: 89 lbs.
Torque –
600 lbs. of torque.
Finishing –
Aluminum.
Capabilities –
Maximum gate size 15' wide, 600 lbs.
Operator Travel Speed –
14 to 18 seconds 90 opening.
Running System –
Uses a Microcontroller with built-in “watchdog” system.
Modular Board –
Board uses LEDs to indicate all input and output functions.
Sensor –
When the gate makes contact with an object while opening or
closing, the gate will reverse for 1 second then go into neutral, so it
can be pushed by hand.
Timer –
Can be set from 3 to 60 seconds, or “push- open/stop/close”
operation.
Master/Second –
Dictates synchronized movement between two gate operators.
Safety Loop Input –
Anti-tailgating system uses a “stop only” method of operation.
Will not work as a commercial loop system.
Alarm Output –
Can be interfaced with any home alarm system. Alarm will sound if
the gate is forced open manually.
Optional siren can be installed.
Stop/Reset Button –
Stops gate or resets UL alarm.
Spike Suppressors –
Protected by spike suppressors.
Alternate Outputs –
Sensor alarm, alarm system, and magnetic locks.
Electronic Inputs –
Factory installed radio receiver, full-control system “push-
open/stop/close”, safety loop, photocell, telephone entry, and key
switch.
Housing Finish –
Weather
proof.
39.5"
3.5"
5.75"
4"
10.5"
12.25"
5.25"
Electrical Specifications
Front
Top
Side
Back
Side
Top
Front
Bottom
