UNIVERSAL REMOTE CONTROL
The remote control can be programmed to activate
up to two products, such as a garage door opener,
gate operator, or commercial door operator. Each
button on the remote control works independently
of the other and must be programmed separately.
The images throughout this manual are for
reference only and your product may look different.
MODEL KLIK3C-BK2
MODEL KLIK3C-BL2
MODEL KLIK3C-SS
MODEL KLIK3C-RT1
To prevent possible SERIOUS INJURY or
DEATH from a moving gate or door:
• ALWAYS keep remote controls out of reach
of children. NEVER permit children to
operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be
seen clearly, is properly adjusted and there
are no obstructions to door travel.
• ALWAYS keep gate or door in sight until
completely closed. NEVER permit anyone to
cross path of moving gate or door.
Read instructions thoroughly BEFORE
beginning.
If using the Universal
Remote Control with residential door
openers, the remote control must be
used only with door openers
manufactured after 1993 that utilize photoelectric
sensors. The photoelectric sensors are always
located on or near the bottom of the door track.
STOP
