background image

Model 81LM 

Single-Function Remote Control

Model 83LM Multi-Function Remote Control 

OWNER'S MANUAL

The 80 Series remote control
works only with door openers and
light controls having a green
"learn" button and a green 
indicator light.
Programming instructions are
described and illustrated below.
The additional push buttons on the
Multi-Function Remote Control can
also activate other garage door
openers and/or light controls.
(Instructions for programming
light products are included with
those accessories.)

1. Press and release the “learn” button on

the motor unit. The learn indicator light
will glow steadily for 30 seconds.

2. Within 30 seconds, press and hold the

selected push button on the hand-held
remote. 

3. Release the button when the motor unit

light blinks. It has learned the code. If
light bulbs are not installed, two clicks
will be heard.

To Erase All Codes From Motor Unit Memory

To deactivate any unwanted remote, first erase all codes:

Press and hold the “learn” button on motor unit until the
learn indicator light goes out (approximate-
ly 6 seconds). All previous codes are now
erased. Reprogram each remote or key-
less entry you wish to use.

2

3

1

KG

KG

1

3

9

7

5

1

3

9

7

5

1

2

3

1

2

Instructions are described and illustrated below

2

3

1

KG

KG

NOTICE: To comply with FCC and or Industry Canada rules, adjustment or modifications of this
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the fol-
lowing two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

To prevent possible SERIOUS INJURY or DEATH from a 
moving gate or garage door:
• ALWAYS keep remote controls out of reach of children.

NEVER permit children to operate, or play with remote con-
trol transmitters.

• Activate gate or door ONLY when it can be seen clearly, is

properly adjusted, and there are no obstructions to door
travel.

• ALWAYS keep gate or garage door in sight until completely

closed. NEVER permit anyone to cross path of moving gate
or door.

WARNING

The Remote Control Batteries

The lithium batteries should produce
power for up to 5 years. To replace, pry
open case with visor clip or screwdriver,
as shown. Insert batteries 

positive side 

up (+).
Dispose of old batteries properly.

Replacement Parts

Model 81LM remote case
(circuit board not included)  . . . . . . . . . . . . .41A3984-7
Model 83LM remote case
(circuit board not included)  . . . . . . . . . . . . .41A3888-7
3V2032 Lithium battery  . . . . . . . . . . . . . . . . . . .10A20
Visor clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29B137

© 2001, Chamberlain Group Inc.

114A1763E

All Rights Reserved

Printed in Mexico

FOR SERVICE DIAL OUR TOLL FREE NUMBER:  
1-800-528-2817

To prevent possible SERIOUS INJURY or DEATH:

• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.

WARNING

Select a remote control
push button to operate 
opener

Push button

Model 81LM

Model 83LM

Reviews: