2
3
4
3
P res s and releas e
the yellow
learn button
E nter a 4-digit
P IN of your
choice
? ? ? ?
_ _ _ _
P res s and hold
the enter button
Opener light bulbs
blink
After the lights
blink releas e the
E NTE R button
1
Locate
the yellow
learn button
KEYLESS DEVICE PROGRAMMING (OPTIONAL ACCESSORIES )
To install:
Wireless Keypad
To set the keyless entry PIN:
1. Locate the Yellow Learn button on the garage door opener.
2. Press and release the Yellow Learn button on the garage
door opener. The LED will light.
3. Enter a 4-digit personal identification number (PIN) of your
choice on the keypad.
4. Press and hold the ENTER button. Check to see if the
opener light blinks. Release the ENTER button after the l
ight bulb blinks.
To change an existing keyless entry PIN:
1. Enter the existing programmed PIN that you want to change.
2. Press and hold the # button until the light bulb blinks twice.
3. Enter the new 4-digit PIN of your choice, then press the
ENTER button. The light bulb will blink once.
4. To test, enter the new PIN, then press the ENTER button.
The garage door opener will activate.
19
Activate the opener only when the door is in full view,
free of obstruction and properly adjusted.
No one should enter or leave garage whilst the door is
in motion. Do not allow children to operate push
button(s) or transmitter(s). Do not allow children to
play near the door.
11
