13 mm, 10 mm, 8 mm
5.5 mm
11
CARTON INVENTORY
1. Instruction manual (this document)
2. Stop collar
3. Clamp bracket
4. Release handle, cord and risk of entrapment card
5. Transmitters (2)
6. Wireless wall button (LM650EVGB only)
7. Hardware bag
8. Clamp plate
9. Warning label and risk of entrapment label
10. Opener
11. Extension poles (2) (LM650EVGB only)
1
2
TOOLS REQUIRED
1. Ladder
2. Adjustable wrench for U-bolts already installed
on the door
3. 8 mm socket, 10 mm socket and 13 mm extended
socket and socket wrench
4. 300 mm socket extension (for minimum side-room
installations)
5. Drill and 5.5 mm drill bit
6. Philips-head screwdriver
7. Marker pen
8. Door stand or similar device to safely support door
(not shown)
DOOR REQUIREMENTS
The maximum allowable door height is 4.5 m with a maximum curtain area of 16.5 m²* (LM650EV) & 18 m²*
(LM850EV) (door height in metres multiplied by the width in metres). The door must be spring balanced. *The
Protector System™ (IR Beams) must be installed if the force at the edge of the closing door exceeds 400 N (40 kg).
For LM950EV the maximum allowable door height is 5.5m (light commercial door) with a maximum curtain area of
25m² (door height in metres multiplied by the width in metres). The door must be of continuous corrugated sheet con-
struction, spring balanced & of a mass not exceeding 250kg. Door axle diameter must not exceed 35mm.
Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the roller door drum is
on the edge of the curtain or is a smaller diameter, additional clearance may be required. If the drum is more than 60
mm from the curtain edge or of a smaller diameter, an extension pole kit may be required (section 10).
Different drum and bracket types may result in the minimum side room clearance not being possible and
extension poles being required. Ensure there is a power point near the opener.
3
2
95 mm
95 mm
Minimum distance from
edge of curtain to edge of
door bracket 45 mm
Independent
clamping method
Direct clamping
method
