CHA P-LOOP 2.0
Page 6
e.
Telescoping Mast Clamps
The three Telescoping Mast Clamps are located along the Telescoping Mast (d) and are used to adjust its
length.
Plate 2. Portable Loop Antenna Assemblies and Components.
f.
Flexible Radiator Loop Connections
The Flexible Radiator Loop Connections are UHF sockets (SO-239) located on the right and left sides of the
Tuning Unit (a).
g. Coaxial Cable Assembly
The Coaxial Cable Assembly
(not shown)
is a 12 foot length of coaxial cable, with an RF isolator at the antenna
end, used to connect the CHA P-LOOP 2.0 Antenna to your radio set.
h.
Tuning Knob
The Tuning Knob is located on the bottom of the Tuning Unit (a) and is used to adjust the resonant frequency
of the loop. The tuning capacitor, which rotates approximately 2 ¾ revolutions, is turned right, or counter-
