CHA RXL
Page 11
Specifications
•
This is a RECEIVE-ONLY antenna
–
DO NOT TRANSMIT using this antenna
.
•
The Receive Loop must be installed a minimum of 25 feet from other antennas in use by
transmitters transmitting 100 Watts or more.
•
Frequency: 135.7 KHz
–
30.0 MHz (continuous coverage, which includes the 2200m, 630m, and 160-10m
amateur radio service bands and all medium and shortwave broadcast bands)
•
Diameter: 36 inches
•
Gain: Frequency dependent, see figure (2)
•
RF Connections:
o
Radio Receiver: UHF Socket (SO-239) for Coaxial Jumper to Radio Receiver.
o
BIAS-T and Preamplifier Unit: BNC Socket. Coaxial Cable between BIAS-T Unit and Preamplifier
Unit must have BNC Male connectors at each end (see accessories list).
•
Power: 12V DC (normally supplied by the included DC Power Supply, which requires 120V AC 60 Hz)
•
Weight: 6 lbs.
•
Mount: 1 ¼” mast, camera tripod, or table top
•
Personnel Requirements and Setup Time: one operator, around 5 minutes
Figure 2. Preamplifier Gain.
