100425 - 34 TON FULL BEAM LOg SPLiTTER
SPECiFiCATiONS
29
SPECiFiCATiONS
Log Splitter Specifications
Ram Force
...................................................
34 Ton
Cycle Time
..............................................
16 seconds
Hydraulic Tank Capacity
.............................
5 gal (18.9 L)
Max Log Length
......................................
24 in. (61 cm)
Max Log Weight
.....................................
100 lb. (45 kg)
Coupler Ball Size
.....................................
2 in. (5.1 cm)
Tire Size
...........................................
16 in. (40.6 cm)
Max towing speed
..............................
45 MPH (72 KM/H)
Cylinder size
...................
5 in. × 23 in. (12.7 cm × 58.4 cm)
Cylinder rod size
...................................
1.8 in. (4.5 cm)
Gear Pump
..................................................
2-stage
Max pressure
..............................................
3600 psi
Max flow capacity
.............................
13 GPM (49.2 LPM)
Control Valve
..................................
Detent (auto-return)
Gross Weight
.....................
659.6-697 lb. (299.2-316.2 kg)
Net Weight
.......................................
566.6 lb. (257 kg)
Height
...........................................
40.6 in. (103.1 cm)
Width
...........................................
51.3 in. (130.2 cm)
Length
..........................................
89.5 in. (227.3 cm)
Engine Specifications
Model
................................................
R338P
Displacement
................................................
338 cc
Type
...................................................
4-Stroke OHV
Start Type
...................................................
Manual
Oil Specifications
DO NOT OVERFILL.
Type
................................................
See chart below
Capacity
.......................................
37.2 fl. oz (1100 ml)
-20
0
20
40
60
Ambient temperature
Recommended Engine Oil Type
80
100
120
-28.9
°F
°C
-17.8 -6.7 4.4
15.6 26.7 37.8
48.9
10W-30
5W-30 Synthetic
10W-40
5W-30
NOTiCE
Weather will affect engine oil and engine performance. Change
the type of engine oil used based on weather conditions to suit
the engine needs.
Hydraulic Oil System
Capacity
.............................................
6 gal. (22.7 L)
For year round use in warmer climates (always aBOVE
32˚F/ 0˚C):
–
ISO 32/SAE10W
–
Universal Hydraulic Oil
For year round use in colder climates (BELOW 32˚F/ 0˚C):
–
Automatic Transmission Fluid
Replacement filters:
–
Fram PH9342
–
K&N HP-2008
–
Wix 51361
Fuel Specifications
Use regular unleaded gasoline with a minimum octane rating of 85
and an ethanol content of less than 10% by volume. DO NOT USE
E15 or E85. DO NOT OVERFILL.
Gasoline Capacity
...................................
1.5 gal. (5.5 L)
Spark Plug Specifications
OEM Type
.............................................
NHSP F6RTC
Replacement Type
.....................
NGK BPR6ES or equivalent
Gap
.................................
0.028-0.031 in. (0.7-0.8 mm)
Valve Specifications
Intake Clearance
................
0.002-0.0039 in. (0.05-0.1 mm)
Exhaust Clearance
..............
0.002-0.0039 in. (0.05-0.1 mm)
NOTiCE
A technical bulletin regarding valve adjustment procedures is
available at www.championpowerequipment.com.
important Message About Temperature
Your product is designed and rated for continuous operation at
ambient temperatures up to 40°C (104°F). When your product
is needed it may be operated at temperatures ranging from 2°F
(-10°C) to 122°F (50°C) for short periods of time. If exposed to
temperatures outside this range during storage, it should be
brought back within this range before operation. In any event, the
product must always be operated outdoors, in a well-ventilated
area and away from doors, windows and vents.
NOTiCE
When temperature is below 32ºF (0ºC) use Automatic
Transmission Fluid (Dexron-III or similar).
