background image

WARRANTY

CHAMPION POWER EQUIPMENT

2 YEAR LIMITED WARRANTY

Warranty Qualifications

Champion Power Equipment (CPE) will register this warranty 
upon receipt of your Warranty Registration Card and a copy 
of your sales receipt from one of CPE’s retail locations as 
proof of purchase.
Please submit your warranty registration and your proof of 
purchase within ten (10) days of the date of purchase.

Repair/Replacement Warranty

CPE warrants to the original purchaser that the mechanical 
and electrical components will be free of defects in 
material and workmanship for a period of two years (parts 
and labor) from the original date of purchase and 180 
days (parts and labor) for commercial and industrial use. 
Transportation charges on product submitted for repair or 
replacement under this warranty are the sole responsibility 
of the purchaser. This warranty only applies to the original 
purchaser and is not transferable.

Do Not Return The Unit To The Place Of 

Purchase

Contact CPE’s Technical Service and CPE will troubleshoot 
any issue via phone or e-mail. If the problem is not 
corrected by this method, CPE will, at its option, authorize 
evaluation, repair or replacement of the defective part or 
component at a CPE Service Center. CPE will provide you 
with a case number for warranty service. Please keep it 
for future reference. Repairs or replacements without prior 
authorization, or at an unauthorized repair facility, will not 
be covered by this warranty.

Warranty Exclusions

This warranty does not cover the following repairs and 
equipment:

Normal Wear

Products with mechanical and electrical components need 
periodic parts and service to perform well. This warranty does 
not cover repair when normal use has exhausted the life of a 
part or the equipment as a whole.

Installation, Use and Maintenance

This warranty will not apply to parts and/or labor if the 
product is deemed to have been misused, neglected, 
involved in an accident, abused, loaded beyond the 
product’s limits, modified, installed improperly or 
connected incorrectly to any electrical component.  Normal 
maintenance is not covered by this warranty and is not 
required to be performed at a facility or by a person 
authorized by CPE.

Other Exclusions

This warranty excludes:

 

Cosmetic defects such as paint, decals, etc.

 

Wear items such as filter elements, o-rings, etc.

 

Accessory parts such as starting batteries, and storage 
covers.

 

Failures due to acts of God and other force majeure 
events beyond the manufacturer’s control.

 

Problems caused by parts that are not original 
Champion Power Equipment parts.

Limits of Implied Warranty and 

Consequential Damage

Champion Power Equipment disclaims any obligation to 
cover any loss of time, use of this product, freight, or any 
incidental or consequential claim by anyone from using 
this product. THIS WARRANTY IS IN LIEU OF ALL OTHER 
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. 
A unit provided as an exchange will be subject to the 
warranty of the original unit. The length of the warranty 
governing the exchanged unit will remain calculated by 
reference to the purchase date of the original unit.
This warranty gives you certain legal rights which may 
change from state to state or province to province. Your 
state or province may also have other rights you may be 
entitled to that are not listed within this warranty.

Contact Information

Address

Champion Power Equipment, Inc.
Customer Service
12039 Smith Ave.
Santa Fe Springs, CA 90670 USA
www.championpowerequipment.com

Customer Service

Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)
Toll Free: 1-877-338-0999
info@championpowerequipment.com
Fax no.: 1-562-236-9429

Technical Service

Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)
Toll Free: 1-877-338-0999
tech@championpowerequipment.com
24/7 Tech Support: 1-562-204-1188

WARRANTY

Summary of Contents for 14560






















Reviews: