background image

Warranty 

28 

 

Rev 41311-20100311 E

 

ECS Warranty claim.  CPE shall not be liable hereunder for failures of any warranted parts of a 
CPE engine caused by the use of such an unapproved add-on or modified part. 

 
EMISSION-RELATED PARTS INCLUDE THE FOLLOWING: (using those portions of the list 
applicable to the engine) 
 

Systems covered by this 
warranty 

Parts Description 

Fuel Metering System 

Fuel regulator, Carburetor and internal parts 

Air Induction System 

Air cleaner, Intake manifold 

Ignition System 

Spark plug and parts, Magneto ignition system 

Exhaust System 

Exhaust manifold, catalytic converter 

Miscellaneous Parts 

Tubing, Fittings, Seals, Gaskets, and Clamps associated with these listed systems. 

 
TO OBTAIN WARRANTY SERVICE: 

 
You must take your CPE engine or the product on which it is installed, along with your warranty 
registration card or other proof of original purchase date, at your expense, to any Champion 
Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to sell and 
service that CPE product during his normal business hours. Claims for repair or adjustment found 
to be caused solely by defects in material or workmanship will not be denied because the engine 
was not properly maintained and used. 
 

If you have any questions regarding your warranty rights and responsibilities, or to obtain 
warranty service, please write or call the Customer service of Champion Power 
Equipment, Inc. 

 

Champion Power Equipment, Inc. 

10006 Santa Fe Springs Road 

Santa Fe Springs, CA 90670 

(877) 338-0999 

Attn: Customer Service

 

 

Summary of Contents for 41311


































Reviews: