11
RT10010
ENGLISH
EN
asseMbly
Transport Handle
1. Place the transport handle (7) on the base frame
(9). Align the holes in the handle (7) and the base
frame (9). From the handle assembly fasteners (20),
insert each bolt with washer from the top. Secure in
place with nut (fig. 5,6).
Foot Mounting Bracket
1. Align the holes in the foot mounting bracket
(8) with those in the base frame (9) and secure in
place using the two bolts and nuts from the foot
mounting bracket fasteners (21). Using a 12mm
spanner securely tighten both nuts (fig. 7).
Hopper
1. Place the hopper (4) in position on the base frame
(9) above the cutting blades and slide it across so
that the pins of the frame engage the hinges on the
hopper (4) (fig. 8).
Fig.5
Fig.6
Fig.7
Fig.8
DO NOT place hands or any other body parts
inside the cutter head opening. DO NOT touch the
blades with your hands or any other body parts.
WARNING
