100594 - 1600 PORTABLE POWER STATION
CONTROLS AND FEATURES
13
CONTROLS AND FEATURES
Read this operator’s manual before operating your Power Station. Familiarize yourself with the location and function of the controls and
features. Save this manual for future reference.
Power Station
1.
Carrying Handle(s)
–
Used to lift or carry the unit.
2.
Overload Reset/THD Shield Button
– Press 1x to
re-energize both AC and DC outlets after overload fault.
Press 5x in three seconds to turn THD Shield ON/OFF.
3.
Control Panel
–
See
Control Panel
section.
4.
LED Light
– Used to illuminate the work area in front of the
Power Station.
5.
LED Light Button
– Used to turn LED light ON/OFF.
6.
AC Fast Charge - 120V AC, 60Hz, 4.5A MAX
– Used to
charge the Power Station from a regular wall outlet. Uses
included cord.
7.
DC Fast Charge - MPPT Solar - 10V-28V DC, 25A MAX
(APP Anderson Power Pole DC)
– Used to charge the Power
Station from solar panel(s). Uses included Easy Connect
DC Solar Charge Harness from 1x APP (plug into the Power
Station) to 3x MC4 (connect to the solar panels) connectors -
Solar panels not included.
8.
External Battery Port
– Used to increase the Power
Station run time by adding additional external batteries
(Model 201107 - Expansion Battery Pack not included, sold
separately).
9.
Charging Module Slots
– Used to remove or connect the
charging module from the unit. When necessary, gently
pry and remove the charger module out with a flathead
screwdriver.
10.
Charging Terminals
– Used to connect the charging modules
when positioned in the charger module slots.
1
1
4
3
2
5
6
9
10
7
8
