201107 - 1600 ExPANSiON BATTERy
CONTROLS AND fEATURES
14
intelligauge - Power Station
1
2
%
H
W
12
1234
H/W
W/H/ /
V A
/
1.
Battery 1
– Displays Power Station info when illluminated.
2.
Battery 2
– Automatically toggles and illuminates to display
Expansion Battery info when Expansion Batteries are paired
and connected.
3.
Fuel Gauge
– Each bar represents approximately 20% and
will show as full when the sum of all Expansion Batteries is at
100% or more.
4.
Low Temperature
– Steady red if internal temperature
too low.
5.
High Temperature
– Steady red if internal temperature
too high.
6.
Warning
– Flashes red when battery or circuitry
communication fault has occurred. Steady red when BMS
fault has occurred.
1
10
9
8
7
2
3
4
5
6
7.
Battery level in %
– When multiple Expansion Batteries
connected, the percentage of each battery is added together
and can read higher than 100% when battery 2 icon is
illuminated.
8.
Output
Watts (W), Hours until empty (H), AC Volts (V), and
AC Amps (A).
9.
Battery Out
– Indicates battery is discharging.
10.
Battery In
– Indicates battery is charging. Do not charge
either Power Station or Expansion Batteries while connected
to each other.
* Refer to your Power Station’s Operator’s Manual for a full description of the Power
Station’s Intelligauge functions and icons.
This meter displays a variety of info such as input/output power, charge/discharge times, as well as faults, errors, and protection codes to
help diagnose malfunctions in the Power Station and Expansion Batteries.
The top displays input and output information along with if drawing power from Power Station or Expansion Batteries.
The bottom displays output percent (%), battery level, and icons related to which outlets are in use, specific warnings or other faults and
functions.
When one or more Expansion Batteries are connected and paired to the Power Station, the Battery 2 icon will automatically toggle on and
display info and faults from the Expansion Batteries . When multiple Expansion Batteries connected, the hours until empty and percentage
of each battery is added together when Battery 2 icon is illuminated. The percentage can read higher than 100%. When Battery 1 icon is
illuminated, the display will only show info and faults from the Power Station.
