Description
1. Silicon stopper
2. Water tank
3. Compressor
4. Plug and power cord
5. Front lid
6. View window
7. Control Panel
8. Water tray
9. Evaporator
10. Ice shovel
11. Ice basket
Before first use
1. During transportation, the incline angle of the cabinet should not be over 45°. Do not turn the
ice maker upside down as this may damage the compressor and sealed system.
2. Remove all packing material and carefully check your ice maker to ensure it is in good condi-
tion and that there is no damage to the ice maker or its power cord and plug.
3. The ice maker should be placed horizontally on a level surface. To ensure proper ventilation for
your ice maker allow 150mm of space at the top, the back and on each side. Do not install the
ice maker near an oven, radiator, or any other heat source.
4.
Before using the ice maker for the first time, please wait 2 hours after positioning it, and keep
the front lid open for at least 2 hours.
5. Ensure that the voltage indicated on the ice maker corresponds with the voltage in your home.
Control Panel Operation
• ON/OFF: Press it to turn unit on or off.
• ADD WATER: This indicator will light up and a long noise will sound. You will need to add wa-
ter and press “STOP”, then “START” to restart the ice maker.
• ICE FULL: This indicator will light up and a noise will sound when the ice has reached the
maximum capacity of the storage cabinet. Press “ON/OFF” button to restart the ice maker after
some of the ice has been taken away.
2
EN
Specifications
Daily Ice Output:
10kg / 24 hours
Ice Storage Capacity:
600 g
Water Reservoir Capacity: 1.7 L
Dimensions (W*D*H):
245*355*345mm
Voltage:
AC 220-240V/50Hz
