background image

MAINTENANCE

21

WARNING : ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE 
                 CLEANING, LUBRICATING OR SERVICING THE UNIT.

CLEANING

General cleaning of the treadmill will prolong the life of the treadmill and improve performance.
Keep the unit clean by dusting regularly. Be sure to dust the exposed part of the deck on either 
side of the walking belt and also the side rails.
For best performance, we recommend your treadmill be placed on a treadmill mat. Along with 
reducing noise, a treadmill mat will help to keep dust debris away from your treadmill's critical 
components.Clean the top of the belt with a wet, soapy cloth. Be careful to keep liquid away from 
inside the motorized treadmill frame or underneath the belt.

WARNING : ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET 
BEFORE REMOVING THE MOTOR COVER. At least once a year remove the motor 
cover and vacuum under the motor cover.

 WALKING BELT AND DECK LUBRICATION

It's important to take good care of your treadmill 
deck (the walking surface underneath the belt), 
because the belt/deck friction may affect the 
function and life of your treadmill and requires 
periodic lubrication. 

Use the following timetable as a guide to lubricate the deck :

Type of user          Exercising hours per week           Number of times 

Light user                  less than 3 hours                            Annually 

Medium user              3-5 hours                                  Every six months 

Heavy user                More than 5 hours                   Every three months 

Summary of Contents for C13F





























Reviews: