EN
2
Caution
1. Remove all protective wrappings prior to toasting.
2. If toaster starts to smoke, Press Cancel to stop toasting immediately.
3. Avoid toasting the food with extremely runny ingredients such as butter.
4. Never attempt to remove bread jammed in the slots without unplugging the toaster from the electrical outlet
first. Be sure not to damage the internal mechanism or heating elements when removing bread.
5. The bread slot is only applicable for toasting regular bread slice, like the irregular bread or round bread, you
can toast it on the toast rack.
6. To achieve uniform color, we recommend that you should wait minimum 30s between each toasting so that
color control can reset automatically.
Parts
1. Bread slot
2. Carriage handle
3. Cancel button
4. Reheat button
5. Defrost button
6. Knob
7. Housing
8. Removable crumb tray
6
5
1
4
3
2
8
7
Before the first use
As there is manufacturing residue or oil remained in the toaster or heat element, usually it will emit some odor
when used for the first time. It is normal and will not occur after several times use, for the first use it is suggested
the operation according to the below steps, except without bread, then let the toaster cool down before starting
to toast the first slice of bread.
Use
1. Put bread slice into the bread slot which can be inserted two slices at most every time. Only the regular slice
can be placed into the bread slot. The irregular bread can only be toasted on the toast rack.
NOTE:
Make sure the crumb tray is completely positioned in place before using.
2. Plug the power cord into the outlet.
3. Set color control slide key to your desired color. There is 7-position level, the lowest “1” is for light and the
highest “7” is for dark. The bread slice can be toasted to golden color at the middle position.