Before first use
Check that all accessories are complete and that the unit is not damaged. Add water into the tank
to the max level and brew water several times without coffee powder, then discard the water.
Clean all detachable parts thoroughlt with warm water.
Using your coffee maker
1.
Open the lid and fill the water tank with drinking water. The water level should not
exceed the maximum level marked in water gauge.
2.
Place the funnel into the funnel support and make sure the funnel is assembled
correctly. Then put the filter in.
3.
Add coffee powder into filter. Usually, one cup of coffee needs one leveld spoon of
coffee powder. This can be adjusted according to personal taste. Then close the top lid.
4.
Place the carafe on the keeping warm plate.
5.
Plug the power cord into the outlet. The LCD will display “12:00” indicator will flash.
6.
Press ON/auto/OFF button once, the indicator will be illuminated in red and the
appliance will start working.
7.
The brewing process can be interrupted by pressing the ON/auto/OFF button twice
at any time during operation, and the indicator in it will be illuminated in blue, after about
15 seconds it will be extinguished. The appliance will continue brewing once ON/
auto/OFF is pressed again.
NOTE
:
You can take out the jug, pour and serve at any time, the appliance will stop
dripping automatically. But the time cannot exceed 30 seconds.
8.
Remove carafe to serve when finished brewing (abot one minute after the coffee stops
dripping).
Know your Coffee Maker
Filter
Top cover
Funnel
Water tank
Water gauge
Control panel
Keeping warm plate
Carafe
Carafe Lid
Measuring spoon
EN
3
