EN
FEATURES
1.
Spout
2.
Base
3.
Lid Handle
4.
Handle
5.
Water-level
6.
On/Off switch with
indicator light
FEATURES
6
5
4
3
2
1
OPERATION
Before use for the fi rst time
Before fi rst use, remove possible manufacturing process residues by boiling 3 full kettles of water.
Dispose this water.
Boiling water
1.
Turn the jug so that the spout faces away from you.
2.
Press the button to open the lid.
3.
Fill the jug with the required quantity of water. Never fi ll the water boiler over the “max” level,
otherwise the hot water can spatter out of the base. Make sure that you do not spill any
water on the base.
4.
Close the lid.
5.
Place the jug on the base, and insert the plug in the wall socket.
6.
Push down the on/off switch, the on/off pilot light will illuminate.
7.
The jug kettle is now switched on, and the water will begin to heat. The jug kettle switches
off automatically a few seconds after the water has come to the boil. The on/off pilot light will
now extinguish.
8.
Remove the jug from the base by the handle, and pour the water out. Be carefully you do not
contact the hot water. It can cause serious burning wounds
9.
If you wish to heat the water without it coming to the boil you can switch off the jug kettle at
any time you require.
10.
Remove the plug from the wall socket when you have fi nished using the kettle.
OPERATION
Champion ®
Makadamgatan 14 I 254 64 Helsingborg I Sweden
info@championnordic.se
Designed in Sweden I Assembled in China
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources.
