Basic Operation
QUICK START GUIDE
• Connection
1. Connecting the mains and antenna.
• First Time Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
OSD Language
Press the
◄
/
►
button to select the desired OSD (On Screen Display) language.
LCN
Country
Press the
◄
/
►
button to select the country you want to.
Tuner Type
Press the
◄
/
►
button to select Antenna or Cable.
Auto Scan
Press the
◄
/
►
button to select mode: DTV+ATV, DTV, ATV.
When selecting Cable: A step appears allowing you to set parameters to the channels.
For more information, refer to Channel (Auto Scan).
Turning on and off the TV
• Turn on the TV
• Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug the
set from the mains and aerial.
• No signal
There is No Signal menu on screen when there is no input signal. In ATV/DTV mode,
connected, the TV turns on automatically.
button on remote control can turn on TV from standby mode.
Press the
If TV has a power switch, turn it on firstly.
Connect the AC input cable.
if there is no signal in
1
5 minutes, the TV will turn off automatically. In PC mode, the TV
Press the
◄
/
►
button to select
On
or
Off
.
Mode Setting
9
E
ngli
sh
2. If TV has a power switch, turn it on firstly. Then press
Power button on the
remote to turn on the TV.
Auto Channel Update
Press the
◄
/
►
button to s
elect
On or Off.
set will automatically turn off in
1
minute if no input signal. When VGA cable is
Press the
◄
/
►
button to select Home Mode or Store mode.
