Caution:
Pulling, pushing, or climbing on the TV may cause the TV to fall. In
particular, ensure your children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, causing serious injuries or death. Follow all
safety precautions provided on the included Safety Flyer. For added stability,
install the anti-fall device for safety purposes, as follows.
To secure the TV:
1. Put the screws into the clamps and firmly fasten
them onto the wall. Confirm that the screws have been
firmly installed onto the wall.
★
You may need additional material such as an anchor
depending on the type of wall.
★
Since the necessary clamps, screws, and string are
not supplied, please purchase them separately.
NOTE:
DO not use elastic string .
2. Remove the screws from the centre back of the TV,
put the screws into the clamps, and then fasten the
screws onto the TV again.
★
Since the necessary screws are not supplied. In this
case, please purchase the screws of the following
specifications.
★
Screw Specifications:
For a 32 ~ 55 Inch TV: (M4~M8)(according to actual
3. Connect the clamps fixed onto the TV and the clamps
fixed onto the wall with a strong cable.
★
Install the TV near to the wall so that it does not fall
backwards.
★
It is safe to connect the string so that the clamps
fixed on the wall are equal to or lower than the clamps
fixed on the TV.
★
Remove the cable before moving the TV.
4. Verify all connections are properly secured.
Periodically check connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections contact a professional installer.
NOTE:
All pictures in this manual are examples, only for reference, actual product may
differ from the pictures.
Securing the TV to the Wall
Measurement of screw hole) X L10
29
