• Rapid boiling
• Large capacity in a compact design
• Multiple water level indicators
• One touch opening button
• LED light to notify when kettle is heating
• Automatically shuts off for boil-dry protection
• Stainless steel kettle body inside and out
• BPA-Free
Before first use
, it is recommended that you fill to the maximum level mark with fresh water, boil and empty
the kettle at least 3 times to clear kettle of any tiny particles. Do not drink the water.
1. Open the lid.
2. Fill the kettle with desired amount of water (no more than 20 ounces). Close lid.
3. Connect the plug into a power outlet (120V AC); turn kettle on by pressing the switch. The LED light will
illuminate to indicate the kettle is heating.
4. The kettle will automatically switch off once the water has boiled. LED light will turn off.
5. Pour out water and repeat process.
6. After final rinse let kettle body cool.
TO BOIL WATER
1. Unplug kettle from outlet.
2. Open lid.
3. Fill with water, but no more than
MAX
water level indicator (or 20 ounces).
4. Press lid down to close.
7. Plug into appropriate outlet.
8. Press power switch downward and LED light will appear.
9. When water has boiled it will automatically switch off and LED light will turn off.
10. Unplug kettle from outlet.
11. Lift kettle and pour water slowly into desired vessel.
12.
DO NOT
pour too quickly. Overpouring would cause water to flow out from under the lid and not from
the spout.
13. Only boil
WATER
in this kettle.
12. Always check
MAX
water level indicator before boiling water.
IF KETTLE BOILS DRY
1. The Automatic Boil-Dry protection will activate and shut off the kettle when there is no water left to boil.
2. Unplug from the outlet.
3. Allow 10 minutes to cool and then kettle is ready to be used again.
FEATURES
OPERATING INSTRUCTIONS
4
