Page 9
Operating Limits
Minimum / Maximum Ambient Temperature: -15°C /40°C
Minimum / Maximum Altitude: 0 meters / 1500 meters *
Maximum Inclination: 20° in any direction
*Adjustment to carburetor jet size above 1500m will allow operation above this level, please call
for advice.
Daily Checks
Before use each day, and with the engine switched off and keys removed, the following checks
should be undertaken;
•
Flails
- With the engine switched off and keys removed, the condition of the flails should be
checked. Any damaged or missing flails should be replaced immediately.
•
Engine
- Fluid levels should be checked daily before use and topped-up as necessary. Ensure
the air intake and screen grid are clear of debris. Ensure engine is in good order and
maintained as per engine manufacturer schedule.
•
Bearings
- Ensure bearings are in good order and greased as per the maintenance schedule.
•
Belts
- Ensure belts are in good order, free of debris, dirt and grease and do not have signs of
damage eg. cracking, frayed edges, uneven wear.
•
Fuel
- Ensure fuel is clean and free of dirt / debris. If necessary, check condition of fuel filter.
•
Hitch
- Check condition of swivel hitch and ensure this is attached securely to towing vehicle.
•
Tyres
- Ensure tyres are free from damage and inflated to the correct working pressure for the
conditions at hand
Storage
For extended periods of storage, it is advisable that the machine be first cleaned thoroughly and
fully lubricated. Any servicing and maintenance should be undertaken prior to storage, and any
worn components replaced.
NOTE: Fuel should be treated with a suitable fuel stabilizer before extended storage!
DO NOT OPERATE BEYOND OPERATING LIMITS, DAMAGE TO MACHINERY OR INJURY TO
OPERATOR MAY OCCUR.
