Page 5
Description
The MF350 Mounted Feeder is designed for mounting into the bed of a UTV or pickup, for feeding livestock, through
deposition of pre-defined drops of feed, onto clear ground.
It is recommended to use this attachment with free-flowing feed, eg. Rolls or cobs, to prevent bridging in the hopper.
The MF350 operates with an electric motor mechanism, ensuring accurate disposition. The rotor and wiring
mechanism are all IP67 rated, to ensure trouble-free usage in even the toughest winter conditions.
The MF350 has approximately 300kg carrying capacity (feed material dependant), a galvanised metal hopper and
PVC cover. Please ensure the carrying vehicle has sufficient capacity for the base machine weight (circa 90kg) + the
weight of feed in the hopper when full.
These machines should however only be used to perform tasks for which they were designed - use of the machine
for any other function may be both dangerous to persons, and potentially damaging to components. Use of the
machine beyond the stated usage may invalidate any applicable warranty, as well as being potential in breach of
applicable safety regulations.
Identification
Each machine is fitted with a serial plate (shown below) which details the following:
1.
Model
2.
Date of Manufacture (DOM)
3.
Serial Number
4.
Mass
When enquiring regarding spares or additional
equipment, ensure you have this information to hand.
