Page 10
Control Box
The control box on the MGF350 is a simple switched system with relays, as shown below. The LH switch
opens and closes the shutter, and the RH switch turns the main spinner on and off.
Specification
Supply Voltage: 12V DC nominal, 16V MAXIMUM Power
Consumption:
OFF: Nominal
ON: Up to 25A *MUST BE WIRED DIRECT TO BATTERY!*
Operating Temperature: -10°C to +40°C
Fuse: Control Box: 10A Blade (inside box)
Main Motor: 30A Maxi (on machine)
Protection rating: IP67
Operation
1.
Start the spinner motor by switching ON.
2.
Once motor is up to speed (approx. 2 seconds), open shutter to allow feed onto spinner. When stopping
feeding, use procedure in reverse.
