Page 5
Description
The MGF350 Mounted Game Feeder is designed for feeding a variety of feedstuffs to game birds such as
pheasants, partridges and guinea fowl. Operating with an electric spinner motor and electric shutter,
ensuring accurate disposition. The rotor and wiring mechanism are all IP67 rated, to ensure trouble-free
usage in even the toughest winter conditions.
The MGF350 has approximately 300kg carrying capacity (feed material dependant), a galvanised metal
hopper and PVC cover. An electronic control box controls the motors and spinner by simple switches
and relays. Fuses are located both inside the control box and on the machine itself.
These machines should however only be used to perform tasks for which they were designed - use of
the machine for any other function may be both dangerous to persons, and potentially damaging to
components. Use of the machine beyond the stated usage may invalidate any applicable warranty, as
well as being potential in breach of applicable safety regulations.
Identification
Each machine is fitted with a serial plate (shown below) which details the following:
1.
Model
2.
Date of Manufacture (DOM)
3.
Serial Number
4.
Mass
When enquiring regarding spares or additional
equipment, ensure you have this information to hand.
Implement Decals
If your implement does not contain all of the decals shown below, please contact Chapman Machinery for
replacement decals before use.
Note:
All decals must be present and visible. It is imperative that these are
replaced if damaged to prevent potential harm to users.
* Carefully read
operators manual before
handling this machine.
Observe instructions and
safety rules when
operating.
*Caution - Entanglement
Hazard. Keep hands
away from moving parts
