Char-Broil 16202009 Operating Instructions Manual Download

Page: 7 / 64

Continued

f) The Preheat cycle will run for 40 minutes.
g) After the 40 minute preheat cycle ends:

The appliance will automatically reduce the interior
temperature.

The display will blink "00:00" (no temp will be
displayed)

An audible beep will sound - 3 beeps initially and
then 3 beeps once every 30 seconds thereafter.

h) You can then use the

Temp Button

Meat Probe

Button

Time Button

to start using the smoker.

NOTE:

The appliance will automatically turn off if 60 minutes has

passed after the initial 40 minute Preheat cycle has been
completed (40 minute P 1 hour = 100 total
minutes)

IMPORTANT:

Always cook with both the water pan and smoker box

in place, whether or not they are ﬁlled.

2) Using the

Temp Button

Display Range: 38

C - 135

°C

a) Press the

Temp Button

. The default temperature

setting of 93

C is shown.

b) Press and hold the

“UP”

“DOWN“

button

respectively to raise or lower the desired cooking
temperature. (The display should automatically raise or
lower when the button is pressed and stop when the
button is released.)

c) Press the

Temp Button

again after the desired

temperature setting is entered. After the

Temp

Button

is pressed the display should no longer blink indicating
that it is set.

3) Using the

Time Button

Display Range: 00:00 – 19:00 hours.

NOTE:

The

Meat Probe

function will be disabled.

a) Press the

Time Button

, and a blinking “00:00” is

shown.

b) Press the

“UP”

“DOWN“

button to raise or lower the

hour (“00:00”) in 1 hour increments. (The display should
still be blinking.) The display will raise or lower when the
button is pressed and stop when the button is released.

c) Press the

Time Button

again after the desired hour

portion of the cook time setting is entered. After the

Time Button

is pressed the hour portion (“

:00”)

should no longer blink indicating that it is set.

d) The minute portion (“00:

”) will remain blinking at this

point as it has not yet been set.

e) Press the

“UP”

“DOWN“

button to raise or lower the

minutes (“00:

”). The display should still be blinking.

f) Press the

Time Button

again after the desired minute

portion (“00:

”) of the cook time setting is entered.

After the

Time Button

is pressed the minute portion

(“00:

”) should no longer blink indicating that it is set.

g) After pressing the

Time Button

in the previous step

the time should begin to count down.

h) When using the

Time

function, the display should show

the Set Cooking Temperature and the actual elapsed
Time (countdown). They should alternate every
throughout the length of the cooking cycle.

Control Panel Operating Instructions

(Continued)

i) Once the desired set time has elapsed:

The controller will automatically reduce the appliance
temperature to 49°C.

The display will alternate between 00:00 and 49°C
showing the set time has elapsed.

An audible beep will sound 3 beeps and then 3
beeps once every 30 seconds thereafter until the

Power Button

is pressed, or has reached the

maximum 19 hour automatic shut-off.

Meat Probe Button

Display Range: 10°C to107°C

NOTE:

The

Set Time

function will be disabled.

a) Press the

Meat Probe Button

, and the default desired

meat probe temperature setting of 63°C is displayed
and will blink.

b) Press the

“UP”

“DOWN“

button to raise or lower the

desired meat probe temperature setting.

c) Press the

Meat Probe Button

again after the desired

meat probe temperature setting is entered.

d) After the

Meat Probe Button

is pressed the display

should no longer blink indicating that it is set.

e) When using the

Meat Probe

function, the display

should show the Chamber Temperature and the actual
Meat Probe

Temperature. The display will alternate

throughout the length of the cooking cycle.

f) Once the desired meat probe temperature has been

reached:

The controller will automatically reduce the set temp
to 49°C.

The display will alternate between the actual Meat
Probe temperature and 49°C.

An audible beep will sound 3 beeps and then 3
beeps once every 30 seconds thereafter until the

Power Button

is pressed, or has reached the

maximum 19 hour automatic shut-off.

5) The meat probe may be unplugged or removed from the food

at any time. If the meat probe is not plugged in or does
not reach the desired meat probe temperature setting,
power to the heating element continues until the

Power

Button

is pressed, or has reached the maximum 19 hour

automatic shut-off.

Optional LED Light Button

: This button turns on and off the

chamber light, if equipped.

Cleaning the heating element bracket:

The element bracket may be cleaned with a damp cloth using a mild
detergent or hot soapy water.

Dry electrical controller and heating element before use.

Storing your Smoker:

Clean cooking grate.