12
•
Connect each of the wires from the main burner electrodes and sideburner electrode into the back of the Electrode Ignition Module.
Total (4) connections, shown
A.
•
Connect the two wires (A and B) from the switch wiring harness into the back of the Electrode Ignition Module.
Total (2) connections, shown
A
.
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown as A, B. Do not
untie the wires while attaching.
•
Release the cap and nut from
electrode ignition module. Attach electrode ignition module to the cart right side panel with the nut
and cap, shown
B
.
24
Right side panel
Electrode
Ignition Module
Electronic
Ignition Cap
Nut
A
B
A
B