Job
Routine Cleaning
Fingerprints and Smears
Stubborn Stains
and Discoloration
Grease and Blood
Burnt-on or
Baked-on Foods
Grease and Oil
Cleaning Agents*
Warm Water, Soap, Ammonia, Detergent
3M Stainless Steel Cleaner and Polish, Arcal 20, Lac-O-Nu,
Lumin Wash, O’Cedar Cream Polish, Stainless Shine
3M Stainless Steel Cleaner and Polish, All chem Concentrated
Cleaner, Samae, Twinkle, Cameo Copper Cleaner, Grade FFF
or Grade F Italian Pumice, Whiting or Talc, Liquid Nu Steel,
Copper’s or Revere Stainless Steel Cleaner, Household
Cleaners, Lumin Cleaner, Zud Restoro, Sta-Clean, Highlite,
Allen Polish, Penny-Brite, Copper-Brite
Scotch-Brite Power Pad 2001, Easy-Off, De-Grease-It, 4% to
6% hot solution of such agents as tri-sodium polyphosphate,
5% to 15% caustic soda solution
Any good commercial detergent or caustic cleanser.
Comments
Apply with sponge or soft cloth.
Can be used on all finishes.
Provides barrier film to minimize
fingerprints. Can be used on all finishes.
Rub lightly, using dry damp cloth, in
the direction of polish lines on the
stainless steel.
Excellent removal on acids, all finishes.
Particularly useful where rubbing
is not practical.
Apply with sponge or soft cloth in
direction of polish lines.
*NOTE: Use of proprietary names is intended only to indicate a type of cleaner and does not constitute an endorsement. Omission of
any proprietary cleanser does not imply its inadequacy. All products should be used in strict accordance with instructions on package.
CARE AND CLEANING OF STAINLESS STEEL
Extreme temperatures from charcoal or wood fires will cause discoloration of stainless steel surfaces. Routine cleaning is necessary
to preserve the appearance and corrosion resistance of Stainless Steel. The methods below are suggestions for cleaning stainless
steel surfaces. Choose a cleaning method appropriate to the requirement. If you choose to use scouring powder or solvents, consult
with the solvent manufacturer or supplier before use.
Before cleaning, first test any cleaning product in an inconspicuous location and consider the possibility of scratching and the
potential for corrosion caused by not completely removing cleaners. Never use brushes or steel wool as they will scratch and leave
particles embedded on stainless steel surfaces, which can lead to rusting. Always rub or wipe in the direction of the polish lines in
the stainless steel surface, not across them. Thorough rinsing with clean water is recommended after all cleaning procedures. Dry
all surfaces completely after rinsing. Be careful not to let any stainless steel cleaner come in contact with painted or plastic
components as damage may occur.
The Char-Broil® Stainless Steel Grill Cleaner and the Thermos® Stainless Steel Grill Cleaner are good choices for routine cleaning
of stainless steel surfaces. Mild stains and loose dirt and soil can also be removed with a soft cloth and clean warm water. Rinse
with clean water and wipe dry.
Stubborn stains, discoloration and possibly rust and rust pitting can occur from cooking, exposure to harsh outdoor conditions, or
extreme cooking temperatures. There are many cleaning agents commercially available formulated to restore the finish of stainless
steel. Obtain advice from the solvent manufacturer or supplier when choosing the appropriate cleaner for your requirement. These
cleaners can be acidic. Care should be taken to avoid contact with eyes or mouth. Be careful not let any powder or solvent come in
contact with painted or plastic components as damage may occur.
The chart below has been reproduced with permission from the Specialty Steel Institute of North America. For additional details
regarding the care and cleaning of stainless steel, visit their website at www.ssina.com for more information. For the latest new
products for the care and cleaning of stainless steel go to www.charbroil.com.
Routine Care
Stubborn Stains
9
