background image

CAUTION

For residential use only. Do not use for commercial 
cooking.

DANGER

Safety Symbols

The symbols and boxes shown below explain what each heading 
means. Read and follow all of the messages found throughout 
the manual.

DANGER: 

 Indicates an imminently hazardous situation 

which, if not avoided, will result in death or serious injury.

WARNING

WARNING: 

 Be alert to the possibility of serious bodily injury 

if the instructions are not followed. Be sure to read and 
carefully follow all of the messages.

CAUTION

CAUTION:

 Indicates a potentially hazardous situation which, 

if not avoided, may result in minor or moderate injury.

1. Do not store or use gasoline or other 

flammable liquids or vapors in the vicinity of 
this or any other appliance.

2. An LP Tank not connected for use shall not 

be stored in the vicinity of this or any other 
appliance.

WARNING

DANGER

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. Open lid.

4. If odor continues, keep away from the appliance 

and immediately call your gas supplier or your 
fire department.

WARNING

CALIFORNIA PROPOSITION 65

1. Combustion by-products produced when using 
this product contain chemicals known to the State of 
California to cause cancer, birth defects, and other 
reproductive harm.
2. This product contains chemicals, including lead 
and lead compounds, known to the State of 
California to cause cancer, birth defects or other 
reproductive harm. 

Wash your hands after handling this product.

To Installer/Assembler: Leave these instructions with 
consumer.

To Consumer: Keep this manual for future reference.

Call the Grill Information Center for Help and Parts

Missing Parts? Assembly Questions?
Before returning grill to store, call 

1-800-241-7548

Some parts may contain sharp edges, 

 

especially 

as noted in these instructions.
Wear protective gloves if necessary.

CAUTION

Operation Problems?

5729581 • 3498886 • 12-20-10

Printed in USA

WARNING

Do not attempt to repair or alter this conversion kit for any 
assumed defect.  Any modification to this assembly will void 
your warranty and create  the risk of a gas leak and fire.  Use 
only authorized replacement parts supplied by manufacturer.

• 

Read and follow all Safety, Assembly,  
and Use and Care Instructions in this 
Guide before assembling and cooking  
with this grill. 

• 

Failure to follow all instructions in this  
Use and Care Guide may lead to fire or 
explosion

which

 

could

 

result

 

in

 

property

 

damage

personal

 

injury

 

or

 

death

WARNING

Summary of Contents for 5729581





















Reviews: