ASSEMBLY
2
1/4-20x1/2” screw
1
Attach side panels to bottom shelf using three
1/4-20x1/2”
screws per panel.
IMPORTANT: Panel with large hole must
Be on Right side of bottom shelf.
Locking caster
Bottom shelf
Rear
Front
Fixed caster
13
Left side panel
(with large hole)
Make sure side panels
are pushed as far to the
rear of bottom shelf as
possible before fully
tightening screws.
Right side panel
Magnet
Front
Caster pin
A
Place bottom shelf upside down. Insert Caster Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Caster Pin and repeat for remaining
casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front.
After all 4 casters are secure, remove the Caster Pin and save for future maintenance.
Summary of Contents for TRU-Infrared 463251012
Page 38: ...NOTES 38 ...
Page 40: ......